Manual Sterile Sampling Valve With Clamp And Hose End
* Without dead corner design
* Internal taper design, allowing for complete discharge of liquid after sampling with no residue
*The valve body and connecting parts are made of a single piece of material to avoid cracks
Sanitary Manual Sterile Sampling Valve
............................................ Sterile Sampling Valve: Design ...................................................
Connection Way : Welded / Clamped / Flange
............................................ Sterile Sampling Valve: Product Overview ...................................................
|
Size |
DN6-DN40 or Customized Size |
| Body Material | SS 316L / 304 (CF8M / CF8) |
|
Handle Material |
Plastic / Stainless Steel |
|
Seal Material |
PTFE Or Others |
| Max Pressure | 1.0 MPA(10 Bar /PN 10) |
| Temperature | - 30 ºC ~ 150 ºC (PTFE normal temperature type) |
| Operation |
Manual /Pneumatic (Optional ) |
| Available Standard | 3A /BPE /DIN /ISO /IDF,SMS etc. |
| Certification | 3A-54-02/1580, PED97/23 EC, FDA177.2600 |
| Application Scope |
pharmaceutical, dairy, food, beverage, water processing, wine, fine chemicals industries etc. |
Sampling Operation
1. Open the valve : start sampling
2. After sampling is completed,close the valve.
3. Steam sterilization .
Sterilization Operations
1.Connect the steam hose to the upper connecting pipe of the valve.
2. Turn on the steam source. Let it flow through the valve for sterilization. 121°C for 1 minute .
3. Turn off steam source .
4. Remove the hose and place a sterile rubber stopper or other item onto the connecting tube
* Internal taper design, allowing for complete discharge of liquid after sampling with no residue
*The valve body and connecting parts are made of a single piece of material to avoid cracks.
